Hellobox V5 for RS232 upgrade tool

Hellobox V5 for RS232 upgrade tool

Serial Port Opened
monitor start
download start
Please reboot the STB manually.
Change baudrate to 115200.
monitor stop
Sync Succeed.
Sending boot init…
Send boot init completed.
boot init run successfully.
Sending Client is complete.
Client is up.
Client Functionality is good.
uboot run successful
download successful!
monitor start
usb start;fatload usb 0 83000000 hellobox_V5_plus.bin;sf burn 83000000 0 800000;
(Re)start USB…
auto_detect_usb_port — usb default sel port 1
port_sts0:0x00000803 port_sts1:0x0c000000
auto_detect_usb_port — usb sel port 0
USB: usb_debug
need usb0 plug in….
usb0 device connect port status :0x1803
port0 reset down port status :0x8001205
Register 10011 NbrPorts 1
scanning bus for devices… 2 USB Device(s) found
scanning bus for storage devices… 2 Storage Device(s) found
scanning bus for ethernet devices… 0 Ethernet Device(s) found
reading hellobox_V5_plus.bin

** Unable to read “hellobox_V5_plus.bin” from usb 0:1 **
do_spi_flash_uboot_save offset[0] len[2d600000]
spi0 is already setup!!!
SF: spi flash status register: 0x00, 0x00
SPI: Detected EN25QH64A with erase size 64 KiB, total 8 MiB

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button